Arcade guides
Arcade cabinet build guides.
Guides to choosing a cabinet, fitting the controls and wiring the electronics for a DIY arcade build, grouped by subject.
Topic
Choosing a Cabinet
Cabinet formats, screen fit, player count and space planning.
Arcade Cabinet Kit or Build From Scratch? What Each Costs You in Time, Tools and Finish
A straight comparison of building an arcade cabinet from sheet MDF against assembling a flat-pack kit: the tools and skills each needs, where the hours go, what the finish looks like, and when scratch-building is the better choice.
Read the guide →Choosing a Monitor for an Arcade Cabinet: Size, VESA Mounts and What to Measure
How to choose a monitor for a DIY arcade cabinet: why the diagonal size is not enough, the four measurements that decide whether it fits, VESA patterns, monitor versus TV, and the screen limits for every Knockout Arcades kit.
Read the guide →Choosing an Arcade Cabinet Kit
How to choose an arcade cabinet kit by space, screen size, player count and the type of build you want.
Read the guide →Topic
Building & Assembly
Practical assembly and cabinet setup.
Topic
Controls & Components
Joysticks, buttons and control-panel hardware.
Adding a Trackball to an Arcade Cabinet: Which Games Use One and How It Fits
Which arcade games need a trackball, how the Ultimarc U-Trak mounts and connects, which Knockout Arcades kits take the cut-out, and when a spinner is the better choice.
Read the guide →Arcade Cabinet Components: What to Buy for Your Kit
Three UK shopping lists for a DIY arcade kit, from a first build on a budget to a PC with a trackball, with quantities, price bands and the checks that matter.
Read the guide →4-Way or 8-Way Joystick? Which Games Need Which, and What a ServoStik Does
The difference between a 4-way and an 8-way arcade joystick, why Pac-Man and Donkey Kong misbehave on the wrong one, the games that need each, and how a ServoStik switches between the two without opening the control panel.
Read the guide →Sanwa Arcade Buttons: Types, Fitting and Compatibility
Common Sanwa arcade-button types, 30 mm mounting, snap-in versus screw-in bodies and control-panel compatibility.
Read the guide →Sanwa Arcade Joysticks
What to check when choosing a Sanwa joystick for a DIY arcade cabinet, including mounting, harnesses, restrictor gates and cabinet compatibility.
Read the guide →Sanwa JLF vs JLX vs JLX2: Differences, Compatibility and Upgrades
What actually changed between the Sanwa JLF, JLX and JLX2 joysticks, which parts swap between them, how the GT-8F and GT-8X gates differ, and whether a JLF is worth replacing.
Read the guide →Six or Eight Buttons Per Player? Choosing an Arcade Control Panel Layout
Where six-button and eight-button arcade layouts come from, which games need each, what the admin buttons are for and how many you need, and which Knockout Arcades panels are drilled for which.
Read the guide →Topic
Electronics & Wiring
Game hardware, interfaces, power and wiring.
JAMMA Explained: Connecting a Game Board to Your Cabinet
What JAMMA standardises, how a JAMMA harness connects an arcade PCB to a cabinet, and what to check before using JAMMA hardware in a DIY build.
Read the guide →Wiring Arcade Buttons and Joysticks: Connectors, Encoders and Which Board for Which System
How arcade buttons and joysticks wire up: microswitch tabs, common ground, 2.8 and 4.8 mm connectors, the 5-pin joystick plug, and the board you need for a PC, Raspberry Pi, Pandora Box, JAMMA board or games console.
Read the guide →Topic
Artwork & Finishing
Artwork, edging and finishing choices.
Arcade Cabinet Artwork: Choosing and Applying Side Art, Marquees, Bezels and Overlays
A guide to arcade cabinet artwork: choosing side art, marquees, bezels and overlays, getting the sizes right, and applying vinyl to a melamine cabinet.
Read the guide →How to Fit T-Moulding to an Arcade Cabinet
Fitting T-moulding to the pre-slotted edges of a Knockout Arcades kit: which size you need, how to tap it in, and how to handle inside and outside curves.
Read the guide →How to Light an Arcade Marquee: LED Strips, Light Bars and Getting Even Light
The ways to light the marquee on a DIY arcade cabinet, from a 12 V LED strip to a plug-in light bar or a colour-changing strip, how to power each one, and how to avoid hot spots and get an even glow behind the acrylic.
Read the guide →Topic
Software & Game Systems
Choosing and configuring the system that runs the games.